Emmegi

5-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel up to 4 m. The 4th and 5th axis allow the electrospindle to continuously rotate to NC from -15° to 90° on horizontal axis and from -360° to +360° on continuous vertical axis, to perform the work on the upper side and on all the lateral sides of the profile. It is equipped with a 12-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

Electronic double-head cutting off machine with automatic movement of the mobile head through a C.C. motor and outward pneumatic tilting of the heads up to 45° or 22°30’, according to the model. 450 or 500 mm-blade. Equipped with an industrial computer for an optimal viewing of the cutting lists. Available with a useful cut of 4, 5, 6 m in length.

Single head, rising blade cutting-off machine with automatic cycle, for 90° cutting, equipped with N/C bar feeder. It can be set up with four different diameter blades, the blade feed is N/C electrical driven. For cutting needs that require a perfect finish, a pneumatic system for the automatic separation of the cut piece, in order to avoid the traces commonly left when the blade comes back in this cutting mode, is optionally available. It can be also provided with inverter, to control the blade rotation speed for the best adjustment to the cutting profile. It can also be equipped with an automatic bar loading magazine and with custom drilling units for particular needs.