Electronic double-head cutting off machine with automatic movement of the mobile head through a C.C. motor and outward pneumatic tilting of the heads up to 45° or 22°30’, according to the model. 450 or 500 mm-blade. Equipped with an industrial computer for an optimal viewing of the cutting lists. Available with a useful cut of 4, 5, 6 m in length.
MOBILE HEADS TILTING
Rotation of the heads around the horizontal axis is performed via pneumatic cylinders. The angles that can be obtained are from 90° to 45° outside for machines equipped with 450 mm diameter blades. With 500 mm diameter blades, angles from 90° to 22°30' outside can be achieved. Intermediate angles are obtained by means of a special stop that can be manually adjusted. Mobile units are equipped with integral pneumatic drop-down protections of the machining area.
CONTROL
The control installed on the various models, designed for ease of use and sliding on bearings, allows correct positioning of the moving heads according to the specifications of the cut to be made. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
DIGITAL VIEWER FOR INTERMEDIATE ANGLES (OPTIONAL)
In the presence of pneumatic tilting of the moving heads, the intermediate angle viewer allows the tilting of the cutting unit to be identified with absolute precision, ensuring the accuracy of the cut profiles. Especially useful in making out-of-square cuts, it allows the operator to quickly and accurately identify the required angle.
ELECTRONIC PROFILE THICKNESS GAUGE (OPTIONAL)
This refined profile thickness control system enables automatic correction of the cutting dimension according to the actual size of the profile, with relative tolerance resulting from surface treatments such as painting, anodising, etc. The device can be used at the operator's discretion and in various modes according to different probing cycles resulting in correction of the entire cutting list, including the macrostructure formula.
PNEUMATIC INTERMEDIATE SUPPORT (OPTIONAL)
The pneumatic intermediate support is extremely useful when cutting light profiles of considerable lengths. In this case, the pneumatic support will, automatically, provide the ideal condition to support the profile. This accessory is available for all lengths, but is specifically recommended on machines having 5- and 6-meter useful cuts.
LABEL PRINTER (OPTIONAL)
The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.
